Injection Molding Machine

FIG. 1 is a top, front, right perspective view of an injection molding machine, showing my new design;

FIG. 2 is a top, front, left perspective view thereof;

FIG. 3 is a front elevational view thereof;

FIG. 4 is a rear elevational view thereof;

FIG. 5 is a top plan view thereof;

FIG. 6 is a bottom plan view thereof;

FIG. 7 is a right side elevational view thereof;

FIG. 8 is a left side elevational thereof;

FIG. 9 is a top, front, right perspective view thereof in a controller unit tilted state;

FIG. 10 is a top, front, left perspective view thereof in the controller unit tilted state;

FIG. 11 is a front elevational view thereof in the controller unit tilted state;

FIG. 12 is a rear elevational view thereof in the controller unit tilted state;

FIG. 13 is a top plan view thereof in the controller unit tilted state;

FIG. 14 is a bottom plan view thereof in the controller unit tilted state;

FIG. 15 is a right side elevational view thereof in the controller unit tilted state;

FIG. 16 is a left side elevational view thereof in the controller unit tilted state;

FIG. 17 is a top, front, right perspective view thereof in a door open state;

FIG. 18 is a top, front, left perspective view thereof in the door open state;

FIG. 19 is a front elevational view thereof in the door open state;

FIG. 20 is a rear elevational view thereof in the door open state;

FIG. 21 is a top plan view thereof in the door open state;

FIG. 22 is a bottom plan view thereof in the door open state;

FIG. 23 is a right side elevational view thereof in the door open state;

FIG. 24 is a left side elevational view thereof in the door open state;

FIG. 25 is a top, front, right perspective view thereof in a door open and controller unit tilted state;

FIG. 26 is a top, front, left perspective view thereof in the door open and controller unit tilted state;

FIG. 27 is a front elevational view thereof in the door open and controller unit tilted state;

FIG. 28 is a rear elevational view thereof in the door open and controller unit tilted state;

FIG. 29 is a top plan view thereof in the door open and controller unit tilted state;

FIG. 30 is a bottom plan view thereof in the door open and controller unit tilted state;

FIG. 31 is a right side elevational view thereof in the door open and controller unit tilted state; and,

FIG. 32 is a left side elevational view thereof in the door open and controller unit tilted state.

The broken lines depict portions of the injection molding machine and form no part of the claimed design.